Using Skype with Cellular BroadBand Modems

If your like me you will want to make sure you have the best possible speed and connection with your broad band modem. Here are a few articles to better help with you get the best possible speed with a broad band modem like a Cricket modem:

• Cricket USB UM100 Broadband Wireless Modem Review.


• Get your Cricket Broadband to Activate Manually!


• Cricket Broad Band Modem Extended Review 12/23/08


• Cricket Wireless Broadband Card — How to get better speed!

Some other things to consider are:

• Getting better speeds from your Cellular broadband!


• Understanding a Cellular Modems

These will start to make it better for you to use a modem and get the best possible speeds from the modem.  You have to realize what your coverage area is.  There are many factors in regards to your modem speed but that is something that you will have to figure out how to get better speeds.

How do you use Skype with your Cellular broad band modem?

Somethings to remembers with your broadband modem is you won't have a good connection no matter how hard you try.   Most cellular carriers don't want you to us it with VOIP(Voice of Internet Protocol).   So you will have to pay close attention to how you use the bandwidth and what you are doing while making a VOIP call.

The good thing about Skype is, it comes with some very useful tools to better watch your bandwidth and to help get the best possible connection.  You will want to make sure not to have it be a super-node, to do this you go to:

Tools then;Options

<

As you can see I checked off use port 80 and 443 as alternative incoming connections, I also like to see all the technical information and bandwidth usage per call.  I made sure to use Socks5 to prevent skype from becoming a super-node. I also have it set to not automatically start up when I load windows.  To do that all you have to do is go to the General tab and un-check start Skype when Windows start.   You can use any port you want as long as you use the same on the SOCKs5 setting also.   I just made the port up it can be 0 to 4 numbers long.   If you want to understand what ports are this little document will greatly help you figure out which ports are good to use.  Some other things to remember when you use Skype for long periods of time is if you need to call someone you should try not to use the internet to much for that takes bandwidth also.  It is better to have Skype use all the possible bandwidth you have available.

Understanding a Cellular Modems

So you bought a modem, and you're not getting the speed you expected.

Yep it is unavoidable to not get that broad band speed you expected from buying a Cellular Modem and you want to learn more about what can affect your upload/download speed on the modem.   Each carrier has there own specific speeds or usage.  We will go through each and everyone one them talking about the kinds of speeds:

[ad#tmi-right-1]

• EVDO -- is known as Evolution-Data Optimized and is most commonly around the major city areas. It is sometimes consider 3G and is considered the fastest in the industry. Although there are always going to be debates on who is the fastest, it really doesn't matter because of the limitations of the networks.


• GPRS -- General Packet Radio Service and is also part of the 3G network but requires different frequency to acquire the signals from the tower. This is used in lower end of companies due to the fact it is easier to maintain than EVDO, but the speed is still comparable to all the other 3G family because of the interdependency of the connectivity.


• WiMAX -- Worldwide Interoperability for Microwave Access and The technology provides up to 75 Mb/s symmetric broadband speed without the need for cables. The technology is based on the IEEE 802.16 standard (also called Broadband Wireless Access).

[ad#cricket-1-1]There are so many of them to talk but each of these can help you understand what the differences of these are and what do they mean.  My cellular modem is using EVDO from Cricket Wireless and have not had any major problems yet.   Others would use GPRS or WiMax or even the others, but it still is important in understanding each has its own speed and flaws.

So does it matter if I am I'm close to the tower?

In short yes but as long as you have a couple towers in the are it shouldn't really matter.  You should still get the speed you thought you were going to get when need it.

Is Cellular modems really Broad band?

In truthfulness the true broad band speed is actually FIOS and Cable right now because they can handle he download and upload speed.  Most companies consider broad band to be something faster than dial-up.

So How do you get better speeds?

Each network is different, it can vary from time to time due to network congestion or if they are having problems with the network.   Some things to consider when you are getting bad speeds are updating your modem in one way or another.   You might also consider checking out your area to find all the cellular towers are and to be able to direct the modem in the right way.  You can also try to purchase a cellular antenna to better get what speeds your looking for.  That might get you some better speeds than what you were getting.

These tips and tricks will better get your speeds up on your modem.   This should also help you understand the truth behind broad band.

What is a Virus and Why do I have one

After seeing more and more the updates coming from the net.  I wanted to talk about what a Computer Virus or Trojan is and how you get it.   So how did  you could of gotten a Virus in the first place.   So here are some information to consider:

The vulnerability of operating systems to viruses

So what does that mean to you?  Most of the times when you get a virus you have a vulnerability in some place in your Operating system and it is either something that has not be known by Microsoft, Apple, and Linux or is know as a Zero-day Exploit. [ad#ad2-right]

A zero-day (or zero-hour) attack or threat is a computer threat that tries to exploit unknown, undisclosed or patchfree computer application vulnerabilities. The term Zero Day is also used to describe unknown or Zero day viruses.

[Via Wikipedia]

This is one of the most used because if it is an unknown exploit by the Operating System creators then they have a longer to us the exploit.  Most of the time hackers like to use this because that means there is a possibility of finding even more vectors to infect other systems.  You see if they can get on one system they can then find ways to get on other systems.

In the Old days, you'd ask

How Did I Get This Virus, Anyway?

You get a virus when you copy infected files to your computer, then activate the code inside by running the infected application or opening an infected document. How you copy the infected files is irrelevant: Viruses don't care if you get them as an e-mail attachment, a download, or via a shared floppy disk, though e-mail attachments are the most prevalent (and easiest) mode of transport.

[via PcWorld] (Dated Oct 13, 2000 11:00 pm)

That was before hackers wanted to infect for more personal gains.   There is a list of things that hackers want to get when they Infect a system and it is usually very few things.   In the Old days they wanted the fame but now they want money and to take control over the internet.  They usually want to infect for Money or to have computers become botnets.  Now We aren't talking about the Movie, I Robot.   Once a system becomes a bot it doesn't think for itself but follows a line of command from the Command and Control center.  So lets say we have  several hundred bots on one net, and the hacker blacked mailed a server saying if they didn't pay up they'd get DoS attacked.  With enough bots going to one site at one time can slow or even bring down a site, that is how A hacker sometimes uses a virus or trojan to get into a system.

Viruses & Trojans try to Avoid detection

So you have a virus, it wouldn't do a virus any good to be detected right after getting onto a system.   More and more, viruses are trying to avoid being seen and heard.  Most hackers who program are wanting to infect more than one system so they have to make really sure that you don't find out your infected.    So with that said there are several ways  and I won't try to explain them because I think the link talks about it better than I could.   It however will give people something to think about.


In the next few days there will be another post on How you will be able to figure out if you have a virus.  I had to talk about this first so people could understand how to figure out if you have in the next post.  So stay tuned for more

Are you asking to be scammed?

As we go further into the economic death, we are faced with the most undesirable aspect of the human culture.  That is to say, scammers are going to use the chance to find people to scam.  I don't say this lightly because scammers have become more cunning and dubious through the years.  They are actually using the internet as well as most companies.  They are going to sites like Monster.com, Careerbuilder.com, and other hiring sites to get people to apply for jobs.

<<See Previous Post -- Nationwide Marketing Scam

Having said that, I recently had a problem with being tried to be scammed.  I applied to a job posted on Careerbuilder and that is how they got a hold of my home address.  I did not think about the security problems associated with applying for jobs on line, until recently.

As you can see that is how they got a hold of my information and have made myself vulnerable to scams and also, other potential problems.  I am talking about Theft ID and also spam.  Although spam is to be expected with anything we do online.  I've come to the conclusion that we will always have to deal with spam.   I wanted to talk about how to be careful when you apply for online jobs and  put your information out on the internet.  I've started taking some steps to prevent this from happening again.

[ad]

• No Longer am I going to apply for any more private companies -- if I can't see who they are then they have something to hide.
  


• To prevent spam -- I am going to make an email address just for my resume.  That way I don't have to worry about spam on my main account.


• If it's too good to be true, it is probably not --  I am going to start using that philosophy when I'm about to apply for a job.  See picture above, advertising way to much money for a Customer Service rep.


• Don't ever put your Social on your Resume --  That is the most crucial part, if you want your identity stolen that is one sure way to get it stolen.  Even though that should be painfully obvious it is sometimes overlooked.
  

I am sure there are more but that is the basic idea of the whole thing.  I will probably come up with even more ideas later on but this was one thing that I have been thinking about all day.    I also think we have to starting asking the questions before the seriousness of the scammers come to bear.   They will never go away but until we get serious, they will always be there to taunt us and laugh us.   I am not sure how to do it,  Do you?   Are we  just supposed to sit here and take it or do we fight back and how?   These are importantquestions  for anyone to consider when you are faced with the possiblity of fraud or being scammed?  How do we deal with it in the future? Should scammers be punished serverely or moderately?

Shutting down Windows Vista Episode 1

Having seen this become obviously a big problem.  I have decided to do a podcast on this and talk about the solutions on it.
[display_podcast]
My Social Networks:

• Friendfeed


• Stumbleupon


• Seesmic


• Mixx


• Disqus


• Ustream.tv


• Twitter

[ad]

My Sponsors:

• http://tinyurl.com/techlinkrobo


• http://tinyurl.com/goodsync1

Show Notes for Shutting Down Vista:

• shutdown /s /f /t 00


• VISTA ShutDown Problem


• Windows Key>Right X 3>Enter


• Changing Hibernation into Shutdown mode


• HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control (right click on WaitToKillServiceTimeout and pick something like 1000 or lower in Milliseconds)


• Nvidia 100.65 Driver Problems

How to Improve Hulu's Advertising :

Lately I've been looking though Hulu and seeing what else they have done.  I've found a secret that most people don't know or haven't look at just yet.  If your tired of some of the ads that come through Hulu.  You have the chance to improve the ads by making your voice heard.



You can pick "Like Ad" or "Dislike Ad"

[ad]

Although this isn't anything new with some stuff.  This however can create even better ads for hulu.  You see if they can get the right demographic idea of what people like, then they will understand what we as a viewer likes.  I simply love this idea.  This is a tramendous step for Hulu, this means we have control over advertising, and we can make or break an ad depending on who likes it.



You can pick "Like Ad" or "Dislike Ad"

[ad]

As you can see these are poping up on all or most of the ads.  If you would like to make your voice be heard.  All you have to do is when an ad comes to you and you like it or hate it just get out of full screen mode by hitting esc (only one time) and you too will see the choices when you hover over that area.

Bandwidth Tools For Monitoring your bandwidth

<<See Previous Post


So I've done some looking around for bandwidth programs.  So here's what I found so far.  The programs I've got listed are not test and are therefore your responsible for any and all use of the programs.

[ad]

• 
  

  FreeMeter Bandwidth Monitor For Windows - Monitor network bandwidth (C#.NET 2k/XP+). Desktop and Systray graph. Configurable connection speed, update interval, color, transparency. Monitor any or all network interfaces. Ping/Trace/UPnP utilities. Email notifier (POP/IMAP). Requires .NET 2.0.

  
  


• 
  

  Pipelog - Windows Bandwidth Meter -- Pipelog is a Windows bandwidth meter that gives live statistics of accumulated bandwidth usage. It is written in C# and runs on the .NET Framework.

  
  


• 
  

  Windows Service Monitor -- Monitor and automatically restart Windows Services with this small Win32 command line utility. Windows Service Monitor (WinSMon) can monitor several services, restart services that stop/fail and limit the number of restart times.

  
  


• 
  

  iptotal -- iptotal is an IP traffic monitor. It listens to a network interface in non-promiscuous mode, and measures IP bandwidth usage. After the specified number of seconds, the average throughput is printed at total, input and output usage.

  
  


• 
  

  Bandwidth Vista 1.0.0.8 -- Bandwidth Vista is modern, informative and intuitive to use. Whether you are looking for network problems or simply want to check the speed of your Internet connection Bandwidth Vista is for you. Bandwidth Vista monitors all your connected interfaces at once and holds a history of transfers, which can be viewed down to the minute. This dynamic application also indicates the countries of remote computers con.

  
  


• 
  

  Bandwidth Monitor 2 -- An ideal tool for the bandwidth conscious, Bandwidth Monitor enables you to keep a close eye on the amount of bandwidth accumulated over the current hour, day, week, month, or even year! Advanced logging tools make it easy to view your bandwidth usage and make alterations to bandwidth logs. Clean up old data at the touch of a button, and import your bandwidth data from our predecessor Bandwidth Monitor 1.0. Version 2 adds Vista compatibility.

  
  


• 
  

  Axence NetTools 3.2 -- NetWatch - network monitoring with e-mail alerting, real-time & historical charts of response time & packet lost. WinTools lists exhaustive system information from Windows computers: running processes & services, registry, event log, disk, memory & CPU information. Port scanner checks for all open ports and running services.

  
  


• 
  

  BitMeter 3.5.7 -- BitMeter 2 is a bandwidth meter, it allows you to visually monitor your Internet connection by displaying a scrolling graph that shows your upload and download speed over time. Features include: Graphical and numerical displays of historical data, Web interface, alerts, stopwatch, calculator, transparent/float/click-through modes, 36-page help file, audio notifications, configurable color-schemes and many other options. Version 3.5.7 offers minor fixes and feature enhancements.

  
  

[ad]

These are just a few that I could find to better keep track of your bandwidth.  These haven't been tested but should get your started in the right directions.  If you have any good suggestions by all means let me know!!